Modems covered on these instructions:

VisionNet 200, 201, 202

If your modem model is not listed here, please return to the previous page and select the DSL Modem Instructions for your modem type. If you cannot find instructions for your exact modem model, then please contact the Help Desk at 800-400-5568.

VisionNet Modem Instructions:

VISIONNET MODEL 200/ 201/202

1) Open Internet Explorer. In address bar type http://10.0.0.2

2) When prompted type the username and password.

Username = admin     Password = visionnet

3) Click Ok

4) Click on Quick Start

5) Change settings to the following:

Encapsulation     PPPoE LLC

NOTE: Do not change username and password settings.

6) Click Connect or Submit

If the modem does not reboot click save setting on the left side of the screen. The modem will reboot, and you will be re-connected.

Note: Settings will be automatically saved to your Router. You do not need to reboot your Router or PC!